Technical Testing Equipment 020 3044 2940
An air flow meter, is a device that measures air flow, i.e. how much air is flowing through a tube. It does not measure the volume of the air passing through the tube, it measures the actual speed of the air flowing through the device.
A boroscope is a remote visual inspection scope or camera to view internal components that would otherwise not be visible.
A cable tester is an electronic device used to verify the electrical connections in a cable
- To ensure readings from an instrument are consistent with other measurements.
- To determine the accuracy of the instrument readings.
- To establish the reliability of the instrument i.e. that it can be trusted.
(Clamp-On-Meter) Special ammeter with a non-invasive jaw that clamps around a single electrical conductor and will display how much current is flowing.
Electrical testers for the below:
Testers measuring CO2, Temperature, Humidty, Dew Point, and Wet Bulb.
(Humidity meter) A hygrometer is an instrument used for measuring the moisture content in the atmosphere.
Specialized instruments for its analytical testing and analysis capabilities.
· Microscopes and Scales
Moisture meters are used to measure the percentage of water in a given substance. This information can be used to determine if the material is ready for use, unexpectedly wet or dry, or otherwise in need of further inspection.
A MultiMeter is an electronic measuring instrument that combines several measurement functions in one unit. A typical MultiMeter would include basic features such as the ability to measure voltage, current, and resistance.
· Digital MultiMeters
· General Purpose Meters
This is a type of electronic test instrument that allows observation of constantly varying signal voltages, usually as a two-dimensional plot of one or more signals as a function of time.
These enable you to check the time, set up a timer or record the exact time.