Quick answer: a switchgear, panel and distribution board thermography survey uses an infrared camera to find loose terminations, overloaded circuits and failing components while the equipment is live and under load. Ti Thermal Imaging surveys LV and HV switchgear, electrical panels, distribution boards, motor control centres (MCCs) and busbars across the UK. Nothing is switched off, and every finding is graded with a recommended action.
Get a free quote within 24 hours or call +44 20 3885 7464.
What we survey
- LV and HV switchgear: incomers, bus sections, circuit breakers and cable terminations
- Electrical panels and distribution boards: main boards, sub-boards and final distribution
- Motor control centres (MCCs): starters, contactors and feeder terminations
- Busbars and bus trunking: joints and tap-offs
Looking for data centre switchgear? See our switchgear thermography for data centres page.
Why survey switchgear and distribution boards?
- Find hot joints before they fail: a loose connection resists current and runs hotter than its neighbours, so it shows on a thermal image long before it trips or starts a fire.
- Plan repairs, not emergencies: a fix in a planned maintenance window costs far less than an outage.
- Show you have maintained your systems: the Electricity at Work Regulations 1989 expect electrical systems to be maintained in a safe condition, and a graded report is documented evidence of the steps taken.
- Satisfy insurers: many insurers ask for a thermographic report as part of fire-risk requirements.
How the survey works
- Live, zero downtime: thermography only works on energised equipment under load, so everything stays in service.
- Under load: we survey under normal operating load, ideally 40% or more, so faults show up.
- Your safety procedures: we work within your method statements and permit-to-work process. Your appointed electrician opens and closes panel covers, and our thermographer never touches live equipment.
What every report gives you
- A thermal image and a matching visual photograph of each finding
- The asset ID and exact location
- Measured temperatures, with load correction applied where load readings can be taken safely
- A severity grade and a recommended action with a timescale
Findings are graded using the ANSI/NETA MTS temperature-difference criteria, with load correction compared against the British Standard cable reference temperature of 75 °C. Surveys are led by ITC Level 3 thermographers. Reports are produced in our TICOR reporting software and delivered through our online portal, usually the next working day.
Related electrical surveys
- Electrical thermographic survey and inspections
- Electrical thermal imaging survey: what is included, cost and how it works
- Electrical fault detection and predictive maintenance
Frequently asked questions
Do you need to shut the switchgear down?
No. The equipment must be energised and under load for thermography to work, so there is no shutdown.
How often should switchgear and distribution boards be surveyed?
Most sites survey critical electrical infrastructure at least annually, and six-monthly where downtime is costly. Older or higher-risk installations benefit from more frequent surveys.
What happens when you find a hot connection?
Each finding is graded with a recommended action and timescale. Your electrician repairs it, and the next survey confirms the fix.
Do you cover the whole UK?
Yes, we survey sites across the UK.
Request a switchgear and panel survey
Call +44 20 3885 7464, email sales@thermalimaging.co.uk or contact us online with your site details and we will send a free quote within 24 hours.