Short answer: a Ti electrical thermography survey is carried out live, with no shutdown, by ITC Level 3 thermographers. Every finding is logged with its location, a thermal and a normal photo, the measured temperature, the load at the time and a recommended action. The report is on our online portal, usually the next working day, ready for your PPM records, your auditor and your insurer.
This page is for FM contract managers and engineering managers who look after electrical PPMs across one building or a whole portfolio. It covers what happens on the day, what lands in your inbox afterwards, why winter is a good time to survey, and how to get your sites booked in.
On the day: live survey, no shutdown
- Thermography only works on energised equipment under load, so we survey during normal operation. Nothing is isolated and the building keeps running.
- Your appointed electrician opens and closes panel covers under your permit-to-work. Our thermographer does not touch live equipment.
- We complete site inductions and wear the PPE the site requires.
- Typical scope: LV switchboards, distribution boards, rising busbars and tap-offs, MCCs and plant panels. We agree the asset list with you before the visit.
Who does the work
Our thermographers are ITC Level 3 certified, and Ti Thermal Imaging is a Level 3 certified thermography company. We are independent: we inspect and report, and we never carry out repairs. That keeps the findings objective, which is what auditors and insurers look for.
What you get: the report
Each finding is written up so someone who wasn’t on site can understand it and act on it:
- The exact location and asset reference
- A thermal image and a matching normal photo
- The measured temperature and where on the component it was taken
- The load at the time of the survey, where it is safe to measure
- A rating and a recommended action for your maintenance team
Reports go onto our online portal, usually the next working day. You can download them for your PPM file, forward them to your insurer or share them with the client.
Sample report extract (anonymised, from a UK data centre survey):
| Location | UPS supply busbar, joint referenced on the run |
| Measured | 46.7°C on the joint, ambient 20.0°C |
| Reference temperature | 95°C |
| Rating | Minor |
| Recommended action | Check bolt torque, and check the joint at the other end of the same bar, which showed a similar uneven temperature |
| Images | Thermal and normal photo side by side |

Several buildings? One programme
If you look after a patch of sites, send us the list and when each was last surveyed. We will group them into one visit window, so you plan around one programme instead of a string of separate bookings. The commissioning or first survey becomes the baseline, and each annual survey is compared against it, so you can see what has changed year on year.
Why winter is a good time to survey
Thermography finds electrical problems by the heat they give off, and that heat depends on the current flowing. In many buildings, heating, lighting and plant push electrical load up over the winter months. The more representative the load on the day, the more clearly a poor connection shows, so a winter survey usually gives you the most useful picture of the year. We record the load against every finding, so the reading can be read in context.
Who we already work for
- An approved supplier to a global FM provider, with planned electrical thermography programmes across the commercial buildings it manages
- Commissioning and live thermography in data centres, where downtime is not an option
- Food production, logistics, offices and industrial sites across the UK, plus clients in the UAE
Ti has also featured on BBC News and ITN.
Frequently asked questions
Do we need to shut anything down?
No. The survey needs the equipment energised and under load, so it is done during normal operation.
What do we need to provide on the day?
Access, a permit-to-work if your site uses one, and an electrician to open and close panel covers. We bring the camera, the PPE and the reporting.
Will the report work for our insurer?
Every finding has its location, images, measured temperature and a recommended action, which is what insurers and risk engineers ask for. If your insurer uses its own checklist, send it before the visit and we will make sure the report covers it.
Book your winter survey
Tell us which sites are due and when they were last surveyed, and we will come back with dates. Call +44 20 3885 7464, email sales@thermalimaging.co.uk or send us your site list.
Related: independent thermal imaging reports for insurers · annual electrical thermography PPM · data centre electrical thermography
About the author: Rachael Browning, General Manager, Ti Thermal Imaging, a Level 3 certified thermography company working across the UK and UAE.