Short answer: the supplies that keep the lines and the cold chain running: the main LV switchboard and distribution boards, motor control centres and drive panels on the processing, slicing and packing lines, refrigeration, chill tunnel and compressor house panels, and boiler and hot water panels. Survey during production, at load, working within the site’s hygiene zone and wash-down rules.
Survey in production, not on the cleaning shift
Thermography needs current flowing. Most processing lines only carry real load while they are running, so the survey is done during production. On the cleaning shift most line panels are lightly loaded, although refrigeration and chill plant keep running and can still be imaged then.
What to include
- Intake and distribution: the main LV switchboard, sub-mains and distribution boards serving production and the cold chain.
- Line panels: motor control centres and drive panels for conveyors, processing machinery, slicers, packing and labelling lines.
- Cold chain: refrigeration control panels, chill tunnels, blast freezers, cold store evaporator supplies and the compressor house.
- Services: boiler, hot water and compressed air panels, and effluent or wastewater pump panels.
Hygiene zones and wash-down
The thermographer follows the site’s hygiene rules: protective clothing, hand wash and boot wash at each zone, and the route the site sets between raw and finished areas. Camera kit is cleaned in line with the site’s rules before it goes in.
Panels in wash-down areas are opened only by the site’s authorised person, never while washing is under way, and closed again straight after imaging. Moving from a chiller into a warm room can fog a camera lens, so time is allowed for the camera to settle before readings are taken.
Traps a food plant sets
Stainless steel reflects heat from everything around it, so readings are taken from surfaces that give a true reading, not from bright metal. Cookers, scalders, ovens and steam lines add process heat that is not an electrical finding. Anti-condensation heaters in panels are warm by design. Each finding is compared like for like, with the load recorded, and given as the measured temperature and the difference in °C.
What the site gets back
A report that names each board and panel by the site’s own references, with a thermal image and matching photo for every finding, the measured temperature, exactly where it was taken and the load at the time. Ti inspects and reports. Your engineering team or electrical contractor carries out any work.
Ti’s thermographers survey food production sites, poultry processing among them.
Frequently asked questions
Will the survey stop the line?
No. The survey is done live, and panels are opened one at a time by the site’s authorised person.
Can it all be done on the cleaning shift?
Refrigeration and chill plant can. Most line panels need to be imaged during production, when they carry load.
How often should a meat or poultry plant be surveyed?
Most food sites survey at least once a year. Your insurer or engineering manager may set a shorter interval for critical lines and cold chain plant.
Related reading
- Survey before or during a planned shutdown?
- What a brewery or distillery survey covers
- How long a survey takes
- 7 electrical risks behind downtime
Ti Thermal Imaging’s surveys are carried out by ITC Level 3 thermographers, and Ti is a Level 3 certified company.
Talk to us: +44 20 3885 7464 · sales@thermalimaging.co.uk · send us your site details
About the author: Rachael Browning is General Manager of Ti Thermal Imaging, which carries out electrical thermography for data centres, FM portfolios and industrial sites across the UK and UAE. Ti’s work has featured on BBC News and ITV.