Short answer: Usually not. NICEIC and TrustMark cover electrical contractors who install, alter, repair or test installations, and TrustMark is aimed at work in people’s homes. A company that only carries out thermography surveys and reports does none of that. Ask instead for the thermographer’s ITC or PCN certificate, contractor accreditation such as SafeContractor, insurance certificates and the company’s registration number.
We get this question from compliance and procurement teams setting up a new supplier. Their standard form was written for electricians, so it asks for NICEIC, ISO 9001, TrustMark and inspection-and-testing qualifications. Some of those fit a thermography company and some don’t. Here is how to read each line.
NICEIC: for the electrician, not the camera
NICEIC assesses electrical contractors whose work is designing, installing, altering and testing installations to BS 7671. A thermography survey is none of these. The thermographer images connections while they run under normal load and reports what was measured. Covers are opened by your own authorised electrician, and any follow-up work is done by your electrician or maintenance contractor. So a survey-only company not holding NICEIC is normal, not a gap. If the same firm also offered repairs or EICRs, that would be a different question.
TrustMark: a home-improvement scheme
TrustMark is the government-endorsed quality scheme for trades working in and around people’s homes. Commercial and industrial electrical thermography falls outside what it is for, so most survey companies won’t be registered and it tells you little about survey quality.
ISO 9001: ask how reports are checked
ISO 9001 is a general quality-management standard. Some survey companies hold it and many smaller specialists don’t. Either way, the useful questions are the specific ones: who reviews the report before it is issued, how findings are located (board, circuit, phase), and whether the report records load and the running state at each reading. A company’s quality policy should answer those.
Inspection-and-testing qualifications: that’s the EICR
Inspection-and-testing qualifications belong to the electrician who carries out the EICR, which includes tests done with circuits isolated. Thermography is a non-contact survey of the live installation and does not replace the EICR. The two work best side by side (see does a thermographic survey replace an EICR?).
What to ask a thermography company for
- Thermography certificates for the people who survey and sign off the report: issuing body (ITC or PCN), level and expiry. Our page on Level 1, 2 and 3 thermographers explains the levels.
- Contractor accreditation such as SafeContractor, which checks health and safety procedures.
- Insurance certificates: employer’s liability, public liability and professional indemnity, in date.
- Legal entity and Companies House number.
- A site-specific RAMS before the visit (more in what a contractor should send before a survey).
Ti Thermal Imaging Ltd (Companies House 04450573) is SafeContractor accredited. Our thermographers hold ITC certification and our team includes ITC Level 3. We send certificates, insurance documents and our quality policy when a new client sets us up as a supplier.
Why the thermographer’s certificate matters most
The camera is the easy part. Reading it means knowing where the measurement was taken, what load the circuit was carrying and when a warm reading is reflection rather than heat. On a London data centre build, commissioning thermography by our team recorded 16 busbar sections reading above 80 °C under test load, the highest 103.5 °C at a tap-off unit, each one located for the installer to investigate. Full detail in busbar thermography at commissioning.

Ti inspects and reports only, with the report issued the same day. See also insurer-ready electrical thermography, our data centre thermography hub, switchgear thermography, annual PPM surveys and 7 electrical risks thermography finds.
Frequently asked questions
Can a NICEIC electrician do our thermography survey?
Only if they also hold a thermography certificate. NICEIC registration covers installation and testing work, not thermal image analysis.
Is SafeContractor enough on its own?
It shows the company’s health and safety procedures have been checked. It doesn’t show thermography competence, so still ask for the thermographer’s certificate.
Does the thermographer need electrical testing qualifications?
Not for the survey itself. Your authorised electrician opens the covers under your safe system of work, and the EICR stays a separate electrician’s job.
Talk to us: +44 20 3885 7464 · sales@thermalimaging.co.uk · contact page
About the author: Rachael Browning is General Manager of Ti Thermal Imaging, which carries out electrical thermography surveys across the UK for data centres, FM portfolios, food production and industrial sites. Ti’s work has featured on BBC News and ITV.